Overall dimensions of a single set of cage equipment: 2340*2100*1600mm
Single cage size: Upper layer: 385*500*320mm, lower layer: 385*930*350mm
The bracket is welded using 40*20*1.7mm hot-dip galvanized square tubes, with welding points treated
Front sealing plate: 0.7mm thick aluminum-zinc-coated plate (coating weight 150g/㎡)
Feces barrier: 0.6mm thick galvanized steel sheet (coating weight 150g/㎡)
Lower crossbeam DN15*1.5 hot-dip galvanized round tube
Cage net hook made of stainless steel
Equipped with a plastic rebound switch and a stainless steel spring to assist in door opening
Cage mesh hot-dip galvanized wire, with a combination of ￠2.8mm and ￠2.5mm diameters (coating weight 275g/㎡)
Each set of cage equipment is equipped with:
Each group is equipped with 24 drinking spouts, which are made of 304 stainless steel
The water output should not be less than 80g/minute, and each water line should be equipped with automatic pressure relief valves, backwash devices, etc., according to the standard
The waterline is designed as a square tube (specification: 22 mm * 22 mm * 2mm). The nipple is required to dispense water in 360 degrees, ensuring that rabbits can drink water fully in any direction. It has excellent leak-proof performance when in a stopped state
6/12 sets of lower-level production boxes, made of PP material, with a thickness of not less than 0.3cm. The bottom requires a mesh state, and the inlet and outlet partitions are made of 0.7mm aluminum-zinc-coated steel
3/6 sets of upper production boxes and backboards
Each set of cage equipment is equipped with 24 PP plastic bottom plates, each measuring 395mm*270mm
All accessory screws are made of stainless steel.
The built-in breeding box can be used for both breeding and fattening of young rabbits.
Breeding rabbits: 18 breeding female rabbits
Breeding baby rabbits: Fatten 108 baby rabbits until they reach a weight of 2.5kg and are ready for slaughter
The single-layer cage allows for easy observation of the rabbits and is simple and convenient to operate.
The upper level features 6 breeding cage spaces and 12 reserve cage spaces that can be freely converted. On the lower level, there are 12 breeding female rabbits, while on the upper level, there are 4 breeding female rabbits and 4 reserve female rabbits (optimal combination, 80% breeding rate). The tiered double-layer design facilitates observation of the rabbits. The large V-shaped slope of the feces guide plate improves ventilation between the upper and lower levels, enhancing air quality inside the cage.